Showing results: 631 - 645 of 805 items found.
-
Apex Technologies
These are cost effective and high performance optical variable attenuators. The modules are available as a single variable optical attenuator or a double variable optical attenuator. They combine 30 dB of maximal attenuation range (per variable attenuator) with a minimum attenuation step (resolution) of 0.1 dB.
-
GX5296 -
Marvin Test Solutions, Inc.
The GX5296 offers advanced dynamic digital I/O performance and capabilities in a single slot, 3U PXI format. The 32-channel, GX5296 features timing per pin, multiple time sets, data formatting, and an advanced sequencer – providing users with the capability to emulate and test complex digital busses for system, board or device test applications. Offering sub-nanosecond edge placement resolution per pin and a PMU per pin, the GX5296 has the ability to perform both DC and AC parametric testing. Each digital channel can be individually programmed for a drive hi, drive lo, sense hi, sense lo, and load value (with commutation voltage level). In addition, each channel offers a parametric measurement unit (PMU) providing users with the capability to perform parallel DC measurements on the DUT (device under test).
-
75000 Auto Wave -
Hickok Inc.
Voltage Input Range:+/-150V (approx. 170V P/P viewable on LCDVoltage Ranges:150V, 100V, 50V, 20V, 10V, 5V, 2V, 1VSample Rate:1 Ms/Sec @ 100uS/DivisionVolt Meter :+/-150V DCAccuracy:+/-2% FS (per range)Storage:up to 9999 waves on SD card
-
PE8203 -
Pasternack Enterprises, Inc.
Pasternack adjustable phase trimmer PE8203 is part of our large selection of in-stock RF, microwave and millimeter wave components available for purchase. This adjustable phase trimmer is manufactured with SMA connectors and has a phase adjustment of 10 degrees. Our SMA adjustable phase trimmer has a minimum frequency of DC and a maximum frequency of 18 GHz.
-
ADQ8-8C -
Teledyne SP Devices
With compact modular form factors, 8 channels per board, and high-precision multi-board synchronization capabilities, ADQ8-8C is ideal for massive multi-channel implementations.
-
33021 -
Chroma ATE Inc.
Max. 48V DC output with 2 channels per card, 12V-48V independently Programable voltage level, Max. 250mA current per channel
-
Rishabh Instruments Pvt. Ltd.,
LCD Touch Screen with user interface panel. Comes with 3/ 6 programmable input channels. Have 6/ 12 alarm outputs and 4/ 8 digital outputs. Visualization of measurements in graphical forms. Compatible with MS windows CE operating System. CE Approved and safety as per European Norms.
-
Agilent Technologies
Flow cytometry is a powerful technique used to quantitively measure individual cells and other particles in suspension, at the rate of thousands of cells per second. Most commonly used in the context of Immunology, we have also started to see the adaption of flow cytometry for environmental studies, extracellular vesicle analysis, and the ability to use upwards of 30+ different parameters for more comprehensive analysis. Agilent flow cytometers offer excellent capabilities, high quality data, and an easy to use platform to save researchers time when acquiring and analyzing data. experiments.
-
Quest Engineering Solutions
Quest Engineering Solutions has the capability to perform IPX Water (Intrusion Protection) testing per numerous IEC standards, including IEC 60529. This testing is designed as a means to verify that the products' internal components are adequately sealed and protected from the intrusion of foreign objects, liquids, and fine particles.
-
FerroCheck 2000 Series -
Ametek Spectro Scientific
The FerroCheck 2000 Series of portable ferrous analyzers offer accuracy and convenience for total ferrous measurement of in-service lubricating oil and grease. Fast and easy to use samples are analyzed in less than 30 seconds. Small sample volumes of just 1.5 ml of oil or 0.75 ml of grease are needed to measure ferrous content in part per million (ppm) by weight. The FerroCheck measures the total ferrous content of both small particles from normal machine wear and large abnormal wear particles.
-
Spectrometer 3091 -
TSI Inc.
The Fast Mobility Particle Sizer 3091 (FMPS™) spectrometer measures particles in the range from 5.6 to 560 nm, offering a total of 32 channels of resolution (16 channels per decade). It uses an electrical mobility measurement technique similar to that used in our SMPS. However, instead of a CPC, the FMPS spectrometer uses multiple, low-noise electrometers for particle detection
-
JX/256-MF -
Cytec Corp.
These Chassis control up to 16 modules with as many as 32 two pole relays per module allowing 1xN multiplexers up to 1020x1, 2 pole muxes up to 512x1 or 2xN matrix configurations up to 256x2. Jumpering option allow the modules to be controlled as separate smaller muxes, i.e. 64 4x1 2 pole muxes, or combine specific groups to allow an almost unlimited combination of sizes. Add a Control Module and optional manual control to complete the system.
-
LXA/128-MF -
Cytec Corp.
These Chassis control up to 16 modules with up to 8 relays per module. A large variety of different switch modules are available to build almost any configuration. Modules are available to build matrix or mux configurations or discrete relay modules. Input detection modules, output driver modules and proto board modules allow custom systems for almost any application. LEDs on the front panel show switch and power status. A thumbwheel manual control is optional.
-
JX32/4(1x8)-2A -
Cytec Corp.
This module has 32 two pole relays arranged as four separate 8x1 multiplexers as shown in the figure. The muxes may be operated and wired individually for up to 64 8x1's per chassis, or jumpered together to form 16x1's or 32x1's or jumpered to the backplane to form up to a 512x1 mux or two 256x1 muxes. It is available with Type A, Armature relays only. Relays may be driven in pairs to build 4 wire multiplexers up to 256x1 per chassis.
-
JX16/4(4x1)-1 and -2 -
Cytec Corp.
This module has 16 single or two pole relays arranged as four separate4x1 multiplexers as shown in the figure. The muxes may be operated and wired individually for up to 64 4x1"s per chassis, or jumpered together to form 8x1"s or 16x1"s or jumpered to the backplane to form up to a 256x1 mux or two 128x1 muxes. It is available with Type S, M or LT reed relays.